EAD 230145-00-0105: 2020基于橡胶粉的沥青和沥青混合物复合材料CE认证/ETA认证详解-上海郜盟
基于橡胶粉的沥青和沥青混合物复合材料ce认证标准-ETA认证
|
EAD 230145-00-0105: 2020
COMPOUND FOR BITUMEN AND BITUMINOUS MIXTURES BASED ON CRUMB RUBBER POWDER
基于橡胶粉的沥青和沥青混合物复合材料
|
The product in the scope of this EAD is "Compound for Bitumen and Bituminous Mixtures Based on Crumb Rubber Powder" [product] which consists of recycled tyres powder (57 % 8 %) (in weight), bitumen(16 % 5 %), lime (30 % 10 %) and other additives. The product is a powder with maximum grain size of 1,0 mm.
上海郜盟提示本EAD范围内的产品为“基于橡胶颗粒粉的沥青及沥青混合料用复合物”[产品】，其成分包括再生轮胎粉(按重量计57%至8%)、沥青(16%至5%)、石灰(30%至10%)及其他添加剂。该产品为粉末状，最大粒径为1.0毫米。
The product is based on crumb rubber powder obtained from ELT (end life tyres), which is heated and then coated with bitumen to complete the digestion process of the crumb rubber powder. After this, lime and other additives are added.
该产品基于从报废轮胎(ELT)中获取的橡胶颗粒粉，经过加热后涂覆沥青，以完成橡胶颗粒粉的消化过程。之后加入石灰和其他添加剂。
The product is not covered by a harmonised technical specification.
该产品不受统一技术规范的覆盖。
Harmonised standards for bitumen (i.e. hEN 140231 and hEN 12591) do not apply for the product as such for the following reasons:
-The product is not a bitumen.
-The assessment methods of hEN do not apply to the product alone.
-Factory production control defined in these hEN are not suitable to ensure constancy of performance of the product.
沥青的协调标准(即hEN14023和hEN12591)不适用于该产品，原因如下:
-该产品不是沥青。
-hEN的评估方法不适用于该产品本身。
-这些IhEN中定义的工厂生产控制不适合确保产品的性能一致性。
However, the performance of the product can mainly be established when it is tested in the mixture with a bitumen. Therefore, some of the harmonised assessment methods specified in hEN 14023 and hEN 12591 are applicable. The performance stated in the ETA are valid only for the mixtures tested.
然而，该产品的性能主要需通过与沥青混合进行测试来确定。因此，hEN14023和hEN12591中规定的部分协调评估方法适用。ETA中所述的性能仅对经过测试的混合物有效。
The mixtures tested (product + bitumen) contribute to the bituminous mixtures as the binders, alike bitumen does in "non-modified" bituminous mixtures. For this reason, the product is assessed under the characteristics of mixtures of the product with bitumen. The assessed characteristics are taken from the harmonised standards of bitumen EN 14023 and EN 12591.
所测试的混合物(产品+沥青)作为结合料对沥青混合料产生影响，类似于沥青在“未改性”沥青混合料中的作用。因此，该产品是根据其与沥青混合物的特性进行评估的。评估的特性取自沥青统一标准EN14023和EN12591。
Moreover, this EAD allows assessment of granulometry (clause 2.2.1), flash point (clause 2.2.5) and behaviour at low temperatures with the bending beam rheometer (clause 2.2.9) which are not considered in annex ZA of hEN 14023 and hEN 12591. Flash point and behaviour at low temperatures with the bending beam rheometer are indicative of behaviour of the mixture (product bitumen) at high and low temperatures respectively.
此外，该EAD允许使用弯曲梁流变仪(条款2.2.9)对颗粒度(条款2.2.1)、闪点(条款2.2.5)和低温性能进行评估，而这些在hEN14023和hEN12591的附件ZA中均未考虑。闪点和使用弯曲梁流变仪测得的低温性能分别指示了混合物(产品+沥青)在高温和低温下的行为。
Concerning product packaging, transport, storage, maintenance, replacement and repair it is the
responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.
关于产品的包装、运输、储存、维护、更换和维修，制造商有责任采取适当措施，并视需要就产品的运输、储存、维护、更换和维修向客户提出建议。
It is assumed that the product will be installed according to the manufacturer's instructions or (in absence of such instructions) according to the usual practice of the building professionals.
假设产品将按照制造商的说明进行安装，或(若无此类说明)根据建筑专业人士通常的做法进行安装。
Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document shall be considered for the determination of the performance and detailed in the ETA.
对本欧洲评估文件所涵盖产品性能有影响的相关制造商规定，应在确定性能时予以考虑，并在ETA中详细说明。
What is an EAD?什么是EAD？
A European Assessment Document, or EAD for short, is a harmonised technical specification developed by EOTA as the basis for European Technical Assessments (ETAs).上海郜盟提示欧洲评估文件（简称EAD）是由欧洲技术认证组织（EOTA）制定的统一技术规范，作为欧洲技术评估（ETA）的基础。
In combination with the ETA, the EAD provides manufacturers with a way to CE marking for construction products that are not or not fully covered by a harmonised European standard (hEN) under the Construction Products Regulation (EU) 305/2011. The CE marking allows the manufacturer to freely market his product in the entire European Economic Area as well as in Switzerland and Turkey.
结合ETA，EAD为制造商提供了一种对未被或未完全被《建筑产品法规》（EU）305/2011所涵盖的协调欧洲标准（hEN）覆盖的建筑产品进行CE标志认证的途径。获得CE标志后，制造商即可在全部欧洲经济区以及瑞士和土耳其自由销售其产品。
Finished floor or ceiling covering as well as possible sound reducing materials are not part of the kit.
完成的地板或天花板覆盖物以及可能的隔音材料不属于套件的一部分。
This EAD is not applicable when
-timber treatments (preservatives, fire and flame retardants) are used, and/or
-recycled material is used.
此 EAD 在下列情况下不适用:
-木材处理工艺（防腐剂、防火阻燃剂）被应用于其中，且/或
-使用了回收材料。
Concerning product packaging, transport, storage, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.
关于产品的包装、运输、储存、维护、更换和修理事宜，制造商有责任采取相应措施，并在其认为必要的情况下向客户提供有关产品运输、储存、维护、更换及修理方面的建议。
It is assumed that the product will be installed according to the manufacturer's product installation instructions (MPl) or (in absence of such instructions) according to the usual practice of the building professionals
假定该产品将按照制造商的产品安装说明（MPl）进行安装，或者在无此类说明的情况下，则按照建筑专业人员的惯常做法进行安装
Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document, shall be considered for the determination of the performance and detailed in the ETA.
对于本欧洲评估文件所涵盖产品的性能判定，应考虑相关制造商的规定，这些规定会对产品性能产生影响，相关内容将在 ETA 中予以详细阐述。
基于橡胶粉的沥青和沥青混合物复合材料ce认证法规-ETA认证
基于橡胶粉的沥青和沥青混合物复合材料产品出口欧盟需要满足CPR建材法规要求：
Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】
基于橡胶粉的沥青和沥青混合物复合材料ce认证模式
TAB机构测试+ETA认证， 由欧盟公告机构进行工厂审核后发证
基于橡胶粉的沥青和沥青混合物复合材料ce认证测试哪些项目
EAD认证流程
基于橡胶粉的沥青和沥青混合物复合材料ce认证机构
公告号机构NB1922,拥有欧盟全品类建材产品授权，上海郜盟拥有该机构直接授权，上海办公室审核员可直接代表机构进行工厂审核，大大减少工厂的差旅成本和时间成本
NB1922欧盟官网资质：
上海郜盟，专业CE认证服务，丰富的行业经验以及专业的工程师可帮助中国工厂快速通过合规评定，取得CE证书！！
【行动号召】
· 如果您正在面临CE、UKCA等认证难题，欢迎联系上海郜盟获取免费预评估！
· 关注我们，获取更多成功案例与行业合规指南。
📞 咨询热线：021-34122669 021-34126062
📩 **扫码获取免费CE认证评估方案**
