EAD 260014-00-0301: 2019 基于煅烧层硅酸盐的II型添加物CE认证/ETA认证详解-上海郜盟

基于煅烧层硅酸盐的II型添加物ce认证标准-ETA认证

EAD 260014-00-0301: 2019 CALCINED LAYER SILICATE BASED TYPE II ADDITION 基于煅烧层硅酸盐的II型添加物

The "calcined layer silicate based type Il addition" is a finely divided powder. The calcined layer silicate is produced of layer silicate by a specific thermal and mechanical process. It consists essentially of SiO2 and Al2O3.

上海郜盟提示“II型煅烧层状硅酸盐基添加剂”是一种细粉。煅烧层状硅酸盐是通过特定的热机械工艺从层状硅酸盐中制得的，主要成分为SiO₂和Al2O3。

The content of reactive SiO2, as defined and described in EN 197-11, amounts to at least 25 % by mass acc. to EN 450-1.

根据EN197-11定义和描述的活性SiO囟含量，按EN450-1标准计，至少为质量百分比25%。

The product can be supplied as powder or as slurry. The slurry is a pH-regulated liquid suspension of "calcined layer silicate based type Il addition" in water.

该产品可供应为粉末或浆料。浆料是pH调节的水性悬浮液，由“煅烧层硅酸盐基II型添加物”制成。

The product is not covered by a harmonised European standard (hEN)

该产品不受统一欧洲标准(hEN)的覆盖。

Concerning product packaging, transport, storage, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.

关于产品的包装、运输、储存、维护、更换和维修，制造商有责任采取适当措施，并就其认为必要的产品运输、储存、维护、更换和维修事宜向客户提供建议。

It is assumed that the product will be installed according to the manufacturer's instructions or (in absence of such instructions) according to the usual practice of the building professionals.

假设产品将按照制造商的说明进行安装，或(若无此类说明)根据建筑专业人士通常的做法进行安装。

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document shall be considered for the determination of the performance and detailed in the ETA.

相关制造商的规定对本欧洲评估文件所涵盖产品的性能具有影响，应在确定性能时予以考虑，并在ETA中详细说明

 

What is an EAD?什么是EAD？

A European Assessment Document, or EAD for short, is a harmonised technical specification developed by EOTA as the basis for European Technical Assessments (ETAs).上海郜盟提示欧洲评估文件（简称EAD）是由欧洲技术认证组织（EOTA）制定的统一技术规范，作为欧洲技术评估（ETA）的基础。

In combination with the ETA, the EAD provides manufacturers with a way to CE marking for construction products that are not or not fully covered by a harmonised European standard (hEN) under the Construction Products Regulation (EU) 305/2011. The CE marking allows the manufacturer to freely market his product in the entire European Economic Area as well as in Switzerland and Turkey.

结合ETA，EAD为制造商提供了一种对未被或未完全被《建筑产品法规》（EU）305/2011所涵盖的协调欧洲标准（hEN）覆盖的建筑产品进行CE标志认证的途径。获得CE标志后，制造商即可在全部欧洲经济区以及瑞士和土耳其自由销售其产品。

Finished floor or ceiling covering as well as possible sound reducing materials are not part of the kit.

完成的地板或天花板覆盖物以及可能的隔音材料不属于套件的一部分。

This EAD is not applicable when

-timber treatments (preservatives, fire and flame retardants) are used, and/or

-recycled material is used.

此 EAD 在下列情况下不适用:

-木材处理工艺（防腐剂、防火阻燃剂）被应用于其中，且/或

-使用了回收材料。

Concerning product packaging, transport, storage, maintenance, replacement and repair it is the responsibility of the manufacturer to undertake the appropriate measures and to advise his clients on the transport, storage, maintenance, replacement and repair of the product as he considers necessary.

关于产品的包装、运输、储存、维护、更换和修理事宜，制造商有责任采取相应措施，并在其认为必要的情况下向客户提供有关产品运输、储存、维护、更换及修理方面的建议。

It is assumed that the product will be installed according to the manufacturer's product installation instructions (MPl) or (in absence of such instructions) according to the usual practice of the building professionals

假定该产品将按照制造商的产品安装说明（MPl）进行安装，或者在无此类说明的情况下，则按照建筑专业人员的惯常做法进行安装

Relevant manufacturer's stipulations having influence on the performance of the product covered by this European Assessment Document, shall be considered for the determination of the performance and detailed in the ETA.

对于本欧洲评估文件所涵盖产品的性能判定，应考虑相关制造商的规定，这些规定会对产品性能产生影响，相关内容将在 ETA 中予以详细阐述。

 

基于煅烧层硅酸盐的II型添加物ce认证法规-ETA认证

基于煅烧层硅酸盐的II型添加物产品出口欧盟需要满足CPR建材法规要求：

Regulation (EU) No 305/2011, Directive 89/106/EEC (CPD)【旧版】

 

基于煅烧层硅酸盐的II型添加物ce认证模式

TAB机构测试+ETA认证， 由欧盟公告机构进行工厂审核后发证

制造商职责：	Factory production control (FPC)工厂生产控制;
	Further testing of samples taken at the factory工厂取样的进一步检验
Notified Body 公告机构职责：	Initial inspection of factory and FPC 工厂和FPC的初始检查;
	Continuous surveillance, assessment and approval of F.P.C. 持续监视、评估和批准F.P.C.
Technical Assessment Bodies (TABs) TAB机构职责	European Technical Assessments (ETAs) are issued by Technical Assessment Bodies (TABs) designated for the relevant product area by the EU Member and Partner States in accordance with the Construction Products Regulation (EU) No 305/2011.欧洲技术评估（eta）由欧盟成员国和伙伴国根据建筑产品法规（EU） No 305/2011为相关产品领域指定的技术评估机构（TABs）发布。

 

 

 

基于煅烧层硅酸盐的II型添加物ce认证测试哪些项目

 

 

 

 

 

 

 

EAD认证流程

 

 

 

基于煅烧层硅酸盐的II型添加物ce认证机构

公告号机构NB1922,拥有欧盟全品类建材产品授权，上海郜盟拥有该机构直接授权，上海办公室审核员可直接代表机构进行工厂审核，大大减少工厂的差旅成本和时间成本

NB1922欧盟官网资质：

 

上海郜盟，专业CE认证服务，丰富的行业经验以及专业的工程师可帮助中国工厂快速通过合规评定，取得CE证书！！

 

---

 

 

【行动号召】

·       如果您正在面临CE、UKCA等认证难题，欢迎联系上海郜盟获取免费预评估！

·       关注我们，获取更多成功案例与行业合规指南。

 

---

 

 

📞 咨询热线：021-34122669 021-34126062  

📩 **扫码获取免费CE认证评估方案**