REGULATION (EU) No 327/2011风机/风扇Erp能效法规-欧盟CE认证

 

COMMISSION REGULATION (EU) No 327/2011 of 30 March 2011 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for fans driven by motors with an electric input power between 125 W and 500 kW

 (EU) No 327/2011关于电机驱动的风机的电力输入功率在125 W至500 kW之间的能效要求

 

1 适用范围

‘Fan’ means a rotary bladed machine that is used to maintain a continuous flow of gas, typically air, passing through it and whose work per unit mass does not exceed 25 kJ/kg, and which: “风机”指的是一种旋转叶片的机器，用于保持气体(通常是空气)的连续流动，通过风机，其单位质量的工作不超过25千焦/公斤，并且:

— is designed for use with or equipped with an electrical motor with an electric input power between 125 W and 500 kW (≥ 125 W and ≤ 500 kW) to drive the impeller at its optimum energy efficiency point, 配合或配用电输入功率在125w ~ 500kw(≥125w ~≤500kw)的电动机，在最佳能效点驱动叶轮，

— is an axial fan, centrifugal fan, cross flow fan or mixed flow fan, 是轴流风机、离心风机、横流风机或混流风机，

— may or may not be equipped with a motor when placed on the market or put into service; 在投放市场或投入使用时，可配备或不配备电机;

 

2 Measurement category测量分类

1) ‘Measurement category A’ means an arrangement where the fan is measured with free inlet and outlet conditions.

2) ‘Measurement category B’ means an arrangement where the fan is measured with free inlet and with a duct fitted to its outlet.

3) ‘Measurement category C’ means an arrangement where the fan is measured with a duct fitted to its inlet and with free outlet conditions.

4) ‘Measurement category D’ means an arrangement where the fan is measured with a duct fitted to its inlet and outlet.

 

3 target energy efficiency’ (η target )目标能效如何计算？

示例：轴流风扇Axial fan

 

4 Calculation method风机能效计算方法

 

ηe = Pu(s) / Pe

 

where:

η e is the overall efficiency;

P u(s) is the fan gas power, determined according to point 3.3, of the fan when it is operating at its optimal energy efficiency point;

P e is the power measured at the mains input terminals to the motor of the fan when the fan is operating at its optimal energy efficiency point;

 

其中风量功率gas power, Pu(s)按照如下公式计算

(a) where the fan has been measured according to measurement category A, fan static gas power P us is used from the equation P us = q · p sf · k ps ;

(b) where the fan has been measured according to measurement category B, fan gas power P u is used from the equation P u = q · p f · k p ;

(c) where the fan has been measured according to measurement category C, fan static gas power P us is used from the equation P us = q · p sf · k ps ;

(d) where the fan has been measured according to measurement category D, fan gas power P u is used from the equation P u = q · p f · k p .

 

5 能效要求

ηe≥η target

 

6 欧盟Erp能效认证流程

1. 提交申请
2. 测量和计算风机能效
3. 能效标识加贴
4. Erp能效注册

 

了解更多： Erp能效指令认证