专业国际检测认证机构

021-34122669

18018853504

欧盟CE认证

EU CE CERTIFICATION

客户案例

技术交流

离心机就是利用离心力使得需要分离的不同物料得到加速分离的机器。离心机大量应用于化工、石油、食品、制药、选矿、煤炭、水处理和船舶等部门。

过滤式离心机的主要原理是通过高速运转的离心转鼓产生的离心力(配合适当的滤材),将固液混合液中的液相加速甩出转鼓,而将固相留在转鼓内,达到分离固体和液体的效果,或者俗称脱水的效果。

沉降式离心机的主要原理是通过转子高速旋转产生的强大的离心力,加快混合液中不同比重成分(固相或液相)的沉降速度,把样品中不同沉降系数和浮力密度的物质分离开。

离心机大量应用于选矿、煤炭、水处理和船舶等部门。

选择离心机须根据悬浮液(或乳浊液)中固体颗粒的大小和浓度、固体与液体(或两种液体)的密度差、液体粘度、滤渣(或沉渣)的特性。

1、离心机欧盟CE认证指令

MD机械指令:2006/42/EC

 

2、离心机欧盟CE认证标准:

EN ISO 12100:2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1:2018 机械安全.机械电气设备.第1部分:一般要求

EN 12547:2014  Centrifuges - Common safety requirements离心机.通用安全要求

 

3、EN 12547:2014 适用范围:

1.1 This European Standard applies to centrifuges for the separation or change in concentration of mixtures of liquids and solids. It gives requirements to minimize the risks caused by the significant hazards arising during the operation of centrifuges as specified in 1.2.

1.2 This European Standard gives requirements for minimizing the risks caused by the following hazards: mechanical hazards common to all types of centrifuges, except those specified in 1.3;

ergonomical hazards; thermal hazards; electrical hazards; noise.

1.3 Types of centrifuges and hazards excluded

1.3.1 Types of centrifuges excluded: centrifuges with a kinetic energy of rotation less than 200 J; centrifuges for household use; centrifuges for laboratory use according to EN 61010-2-020; centrifuges for forming, i.e. centrifugal hot metal casting machines.

1.3.2 Hazards excluded

This European Standard does not deal explicitly with the hazards listed below. NOTE 1 In cases, where such hazards might occur and could become relevant for the construction of the centrifuge, use specific standards for this hazard or make a risk assessment. hazards caused by overpressure or negative pressure inside the centrifuge housing; hazards specific to processing radioactive products; hazards specific to microbiological processing - including viral and parasitic hazards; hazards from processing corrosive and/or erosive materials; hazards from processes involving flammable or explosive substances; hazards caused by leakage of hazardous substances; hazards caused by unsuitable hygienic design for applications involving food products; inherent chemical hazards of process materials and/or service media and their biological effects on exposed persons; NOTE 2 Inherently hazardous substances include toxic, carcinogenic and flammable substances for example. Other substances may be hazardous because of their condition in the centrifuge, i.e. temperature, velocity and vapour pressure. hazards due to construction materials; Materials used in the construction of centrifuges should not be hazardous in the condition in which they are used. centrifuges subject to application specific standards (e.g. EN 12505). NOTE 3 The design of centrifuges covered by EN 12547 varies to the extent that additional hazards may exist that are not covered by the requirements of this standard and is not excluded above. The manufacturer is responsible for providing suitable measures to deal with these hazards as part of a general risk assessment for the machine. Such measures are outside the scope of this standard and the direct responsibility of the manufacturer.

1.3.3 This European Standard gives guidance on the selection of performance levels according to EN ISO 13849-1:2008, but does not identify performance levels for specific applications.

1.4 This European Standard is not applicable to centrifuges which are manufactured before the date of its publication as EN.

1.1上海郜盟提示:本欧洲标准适用于分离或改变液体和固体混合物浓度的离心机。它提出了将离心机运行过程中产生的重大危险所造成的风险降至最低的要求,如1.2所述。

1.2 郜盟国际认证为您专业解读:本欧洲标准规定了将以下危害造成的风险降至最低的要求:所有类型离心机常见的机械危害,1.3中规定的除外;

人体工程学危害;热危害;电气危险;噪音

1.3离心机类型和排除的危害

1.3.1不包括的离心机类型:旋转动能小于200 J的离心机;家用离心机;符合EN 61010-2-020的实验室用离心机;用于成型的离心机,即离心式热金属铸造机。

1.3.2排除的危险

本欧洲标准未明确处理以下列出的危险。注1:在可能发生此类危险并可能与离心机的结构相关的情况下,应使用该危险的特定标准或进行风险评估。离心机外壳内过压或负压造成的危险;处理放射性离心机特有的危害;微生物加工特有的危害——包括病毒和寄生虫危害;加工腐蚀性和/或侵蚀性材料的危害;涉及易燃或易爆物质的过程的危险;危险物质泄漏造成的危害;食品应用中卫生设计不当造成的危害;工艺材料和/或服务介质的固有化学危害及其对接触人员的生物影响;注2:固有危险物质包括有毒、致癌和易燃物质。其他物质可能是危险的,因为它们在离心机中的条件,即温度、速度和蒸汽压力。施工材料造成的危险;离心机制造中使用的材料在使用条件下不应具有危险性。离心机应符合特定应用标准(例如EN 12505)。注3:EN 12547所涵盖的离心机的设计有所不同,可能存在本标准要求未涵盖的额外危险,且上文未排除。作为机器一般风险评估的一部分,制造商负责提供适当的措施来处理这些危险。此类措施不在本标准的范围内,制造商直接负责。

1.3.3本欧洲标准为根据EN ISO 13849-1:2008选择性能等级提供了指导,但并未确定特定应用的性能等级。

1.4本欧洲标准不适用于在其发布为EN之前制造的离心机。

 

 

 

4、EN 12547:2014  欧盟CE认证测试、检查项目

 

 

5、离心机CE认证流程

1 提交CE申请

2 准备测试样机和技术资料

3 样机测试与整改

4 技术资料审核与整改

5 公告机构审核通过后,工厂获得CE证书

6 设备加贴CE标识,顺利在欧盟市场流通

上海郜盟-欧盟公告机构授权-专业CE认证

 

 

了解更多:

机械设备CE认证

CE认证是什么认证?

欧盟CE认证

 

郜盟国际的服务

致力于中国制造全球化服务!

专业提供欧盟CE认证美国FCC认证俄罗斯EAC认证沙特SASO认证英国UKCA认证尼日利亚SONCAP认证等国际检测认证技术服务!标准培训!24小时咨询电话18018853504  13774495352

 

原创文章,严禁转载!

离心机CE认证- EN 12547:2014 详解-MD机械