上海郜盟专业CE认证为您解读：

 

 

1、立式岩心钻机欧盟CE认证指令

MD机械指令：2006/42/EC

 

2、立式岩心钻机欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN 12348:2000+A1:2009 Core drilling machines on stand - Safety立式岩心钻机.安全

 

3、EN 12348:2000+A1:2009适用范围：

This European Standard applies to core drilling machines on transportable stands equipped with a diamond core drill bit, usually with a water supply connection device, and intended to drill holes into stone, concrete and similar mineral materials in a stationary position where the power for the tool rotation is supplied by an electrical, hydraulic, pneumatic or internal combustion prime motor. The feed movement of the drill head and core drill bit may be effected by manual, mechanical or hydraulic means. This European Standard deals with all significant hazards pertinent to core drilling machines on a stand when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This standard does not apply to: percussive or rotary-percussive rock drills either mounted or unmounted; hand held power drills; hydraulic or pneumatic power supply sources; mobile undercarriages to which machines can be fitted. This European Standard does not apply to machinery covered by EN 791:1995. This European Standard covers electrical hazards by making reference to relevant European Standards (see 5.2). Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment of machinery and that are dealt with in standards for common use are not covered by this European Standard. Reference to pertinent standards of this kind is made where such standards are applicable and so far as is necessary. In this European Standard, core drilling machines on a stand are called "machines" and diamond core drill bits are called “tools”. NOTE The term "diamond" is used as a generic word which covers all varieties of abrasive products such as diamond, borum nitride. This European Standard applies primarily to machines which are manufactured after the date of approval of the standard by CEN.上海郜盟提醒您，本欧洲标准适用于配有金刚石取芯钻头（通常带有供水连接装置）的可移动式支架上的取芯钻机，该钻头用于在静止位置钻取石头、混凝土和类似矿物材料的孔，其中工具旋转的动力由电、液压、气动或内燃机提供。钻头和取芯钻头的进给运动可以通过手动、机械或液压装置实现。本欧洲标准适用于在制造商预计的条件下（见第4条）按预期使用时，与支架上的岩心钻机相关的所有重大危险。本标准规定了消除或减少重大危害风险的适当技术措施。本标准不适用于：已安装或未安装的冲击式或旋转冲击式凿岩机；手持式电钻；液压或气动电源；可安装机器的移动底盘。本欧洲标准不适用于EN 791:1995所涵盖的机械。本欧洲标准通过参考相关欧洲标准（见5.2）涵盖电气危险。本欧洲标准不涵盖与所有机械、电气、液压和其他机械设备相关且在通用标准中处理的危险。在此类标准适用且必要的情况下，应参考此类相关标准。在本欧洲标准中，支架上的取芯钻机称为“机器”，金刚石取芯钻头称为“工具”。注：术语“金刚石”是一个通用词，涵盖了金刚石、氮化硼等各种磨料立式岩心钻机。本欧洲标准主要适用于CEN批准该标准后制造的机器。

 

4、EN 12348:2000+A1:2009 欧盟CE认证测试、检查项目

 

5、立式岩心钻机CE认证流程

1 提交CE申请

2 准备测试样机和技术资料

3 样机测试与整改

4 技术资料审核与整改

5 公告机构审核通过后，工厂获得CE证书

6 设备加贴CE标识，顺利在欧盟市场流通

上海郜盟-欧盟公告机构授权-专业CE认证

 

了解更多：

机械设备CE认证

CE认证是什么认证？

欧盟CE认证

 

 

郜盟国际的服务

致力于中国制造全球化服务！

专业提供欧盟CE认证，美国FCC认证, 俄罗斯EAC认证, 沙特SASO认证, 英国UKCA认证, 尼日利亚SONCAP认证​等国际检测认证技术服务！标准培训！24小时咨询电话18018853504  13774495352

 

原创文章，严禁转载！！！