压力下涂层材料供应和循环用机械CE认证- EN 12621:2006+A1:2010详解-MD

上海郜盟专业CE认证为您解读

1、压力下涂层材料供应和循环用机械欧盟CE认证指令

MD机械指令：2006/42/EC

2、压力下涂层材料供应和循环用机械欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements压力下涂层材料供应和循环用机械.安全要求

3、EN 12621:2006+A1:2010适用范围：

1.1 This European Standard applies to the design and construction of machinery for the supply and circulation of coating and/or auxiliary materials under pressure – in the following called "machine" (see 3.1). The coating material is supplied by air pressure or airless. NOTE Machines covered by this European Standard may be linked with e.g. colour mixing machinery, atomising and spraying equipment, spray booths and stands and/or automated coating machinery. The pressure related parts of the machines covered are classified as no higher than category under article 9 of the Pressure Equipment Directive 97/23/EC. This European Standard deals with the significant hazards, hazardous situations and events relevant to the machinery for the supply and circulation of coating and/or auxiliary materials under pressure, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Machinery for the supply and circulation of coating and/or auxiliary materials under pressure consists of the following equipment: pump units; pressure vessels; non-pressurised containers; interconnecting pipes and hoses flanges, nozzles, couplings, supports, lifting equipment etc.; agitators; filters; pulsation damping devices; all safety devices (e.g. level monitoring equipment); equipment for heating and/or cooling of the coating materials. The machine may be fixed or mobile.

1.2 This European Standard excludes: pressure related hazards of equipment classified as higher than category 1 under article 9 of the Pressure Equipment Directive 97/23/EC; atomising and spraying equipment as dealt with in EN 1953:1998 and the supply hoses for this equipment; atomising and spraying equipment as dealt with in EN 50144-2-7:2001, EN 50260-2-7:2002 and the supply hoses for this equipment.

1.3 This European Standard does not apply to: machinery for processing of foodstuffs and pharmaceuticals; design and construction of pipes and hoses; design and construction of coating presses (see 3.23); machinery for the supply of powder coating material.

1.4 This European Standard is not applicable to machinery for the supply and circulation of coating materials under pressure which are manufactured before the date of publication of this document by CEN.

1.1本欧洲标准适用于在压力下供应和循环涂层和/或辅助材料的机械的设计和制造，以下称为“机械”（见3.1）。涂层材料通过空气压力或无空气供应。注：本欧洲标准涵盖的机器可与例如混色机械、雾化和喷涂设备、喷漆室和支架和/或自动涂装机械连接。根据压力设备指令97/23/EC第9条，所涵盖机器的压力相关部件被分类为不高于类别。本欧洲标准涉及与压力下涂层和/或辅助材料的供应和循环机械相关的重大危险、危险情况和事件，当这些材料按预期使用时，在制造商预见的条件下使用（见第4条）。在压力下供应和循环涂层和/或辅助材料的机械包括以下设备：泵装置；压力容器；非加压容器；互连管道和软管法兰、喷嘴、联轴器、支架、起重设备等。；搅拌器；过滤器；脉动阻尼装置；所有安全装置（如液位监测设备）；用于加热和/或冷却涂层材料的设备。机器可以是固定的或移动的。上海郜盟提供专业机械标准解读，设计阶段风险评估，CE认证专项咨询！

1.2本欧洲标准不包括：压力设备指令97/23/EC第9条规定的1类以上设备的压力相关危险；EN 1953:1998中规定的雾化和喷涂设备以及该设备的供应软管；EN 50144-2-7:2001、EN 50260-2-7:2002中规定的雾化和喷涂设备以及该设备的供应软管。

1.3本欧洲标准不适用于：食品和药品加工机械；管道和软管的设计和施工；涂层压机的设计和施工（见3.23）；粉末涂料供应机械。

1.4本欧洲标准不适用于CEN发布本文件之前制造的压力下涂层材料供应和流通机械。

4、EN 12621:2006+A1:2010 欧盟CE认证测试、检查项目